Search results for "Tin oxide"
showing 10 items of 65 documents
The effects of thermal treatment on structural, morphological and optical properties of electrochemically deposited Bi2S3 thin films
2017
Abstract Thin films of bismuth sulfide (Bi 2 S 3 ) have been electrochemically deposited on indium–doped tin oxide substrates from aqueous solutions of Bi(NO 3 ) 3 , ethylene diamine tetraacetic acid (EDTA) and Na 2 S 2 O 3 . The structural properties of the films were characterized using X–ray diffraction and high–resolution transmission electron microscopy analyses. The film crystallizes in an orthorhombic structure of Bi 2 S 3 along with metallic bismuth. Thermal annealing of the prepared film in sulfur atmosphere improves its crystallinity and cohesion. The band gap values of the deposited film before and after annealing at 400 °C were found to be 1.28 and 1.33 eV, respectively.
A graphene-based neutral particle detector
2019
A neutral particle detector is presented, in which the traditionally used target material, indium tin oxide (ITO), is replaced by graphene. The graphene-based detector enables collinear photodetachment measurements at a significantly shorter wavelength of light down to 230 nm compared to ITO-based detectors, which are limited at 335 nm. Moreover, the background signal from the photoelectric effect is drastically reduced when using graphene. The graphene based detector, reaching 1.7 eV further into the UV energy range, allows increased possibilities for photodetachment studies of negatively charged atoms, molecules, and clusters.A neutral particle detector is presented, in which the traditio…
Removal of Surface Oxygen Vacancies Increases Conductance Through TiO(2) Thin Films for Perovskite Solar Cells
2019
[Image: see text] We report that UV–ozone treatment of TiO(2) anatase thin films is an efficient method to increase the conductance through the film by more than 2 orders of magnitude. The increase in conductance is quantified via conductive scanning force microscopy on freshly annealed and UV–ozone-treated TiO(2) anatase thin films on fluorine-doped tin oxide substrates. The increased conductance of TiO(2) anatase thin films results in a 2% increase of the average power conversion efficiency (PCE) of methylammonium lead iodide-based perovskite solar cells. PCE values up to 19.5% for mesoporous solar cells are realized. The additional UV–ozone treatment results in a reduced number of oxygen…
Spectroelectrochemistry of cytochrome c and azurin immobilized in nanoporous antimony-doped tin oxide
2011
Stable immobilization of two redox proteins, cytochrome c and azurin, in a thin film of highly mesoporous antimony-doped tin oxide is demonstrated via UV-vis spectroscopic and electrochemical investigation.
Size-selective incorporation of DNA nanocages into nanoporous antimony-doped tin oxide materials.
2011
A conductive nanoporous antimony-doped tin oxide (ATO) powder has been prepared using the sol-gel method that contains three-dimensionally interconnected pores within the metal oxide and highly tunable pore sizes on the nanoscale. It is demonstrated that these porous materials possess the capability of hosting a tetrahedral-shaped DNA nanostructure of defined dimensions with high affinity. The tunability of pore size enables the porous substrate to selectively absorb the DNA nanostructures into the metal oxide cavities or exclude them from entering the surface layer. Both confocal fluorescence microscopy and solution FRET experiments revealed that the DNA nanostructures maintained their int…
Electrochemical reduction of graphene oxide films in aqueous and organic solutions
2013
Abstract Electrochemical reduction of graphene oxide (GO) films cast on tin oxide glass substrates were carried out in aqueous solutions and in propylene carbonate and acetonitrile. Cyclic voltammetric measurements indicate successful reduction of GO films. The reduction process begins in aqueous solutions at less negative potentials than in organic solutions. Additionally the pH value of the aqueous solutions influences the reduction potential. According to spectroscopic analysis the reduction process of the GO film can be controlled by the choice of reduction potential and electrolyte medium. The potential window in this work was made broader by increasing pH or by using organic electroly…
Microheterogeneous electrocatalytic chiral recognition at monoclinic vanadium-doped zirconias: enantioselective detection of glucose.
2007
Synthetic tetragonal and monoclinic vanadium-doped zirconias (t- and m-VxZr1-xO2, 0.005x0.150) exert an effective catalytic effect toward the electrochemical oxidation of glucose in aqueous alkaline media. The catalytic effect of monoclinic specimens attached to carbon and fluorine-doped tin oxide electrodes exhibits a remarkable enantioselectivity, so that catalytic currents for the oxidation of L-glucose at +0.92 V vs AgCl/Ag are considerably larger than those obtained for the oxidation of D-glucose. This enantioselectivity can be associated with the existence of a noncentrosymmetric coordination of vanadium centers in the monoclinic crystalline form of zirconia. From the electrochemical …
Electrochemistry of TiO2–iron hexacyanocobaltate composite electrodes
2014
Abstract In this paper we investigate the electrochemical behavior of iron hexacyanocobaltate (FeHCC) in comparison to the cobalt hexacyanoferrate (CoHCF). The best results were achieved on electrochemical synthesized film of FeHCC on the TiO2 modified electrodes. The chemical and physical characterizations confirm the formation of the FeHCC with the classical cubic crystal structure of the Prussian blue analogs, with cell parameter a very close to 10 A, as well as the formation of micro aggregates of TiO2 covered by FeHCC. The synthesis was performed on various substrates such as glassy carbon (GC), graphite foil (GF) and indium tin oxide (ITO) in order to develop new technological applica…
Two-Step Solution-Processed Two-Component Bilayer Phthalocyaninato Copper-Based Heterojunctions with Interesting Ambipolar Organic Transiting and Eth…
2016
International audience; The two-component phthalocyaninato copper-based heterojunctions fabricated from n-type CuPc(COOC8H17)(8) and p-type CuPc(OC8H17)(8) by a facile two-step solution-processing quasi-Langmuir-Shafer method with both n/p- and p/n-bilayer structures are revealed to exhibit typical ambipolar air-stable organic thin-film transistor (OTFT) performance. The p/n-bilayer devices constructed by depositing CuPc(COOC8H17)(8) film on CuPc(OC8H17)(8) sub-layer show superior OTFT performance with hole and electron mobility of 0.11 and 0.02 cm(2) V-1 s(-1), respectively, over the ones with n/p-bilayer heterojunction structure with the hole and electron mobility of 0.03 and 0.016 cm(2) …
Deposition of indium tin oxide films by laser ablation: Processing and characterization
1998
Abstract In this work an indium tin oxide thin film fabrication technique based on pulsed laser deposition is described and the electrical, optical and mechanical properties of the deposited films are reported. Deposition of high quality films on cold substrates was proved. The third harmonic (355 nm) of an Nd:YAG laser was employed to photoablade the indium tin oxide target.